11
RS232 COMMUNICATION PROTOCOLS
The balance uses RS232UART signal, one frame consists of 10 Bit
Format
Bit1 Bit2 Bit3 Bit4 Bit5 Bit6 Bit7 Bit8 Bit9 Bit10
BIT1: Startbit Bit2~9: Databit Bit10: Stopbit
All Data is in ASCII Code
Connection
Standard RS2329 pin interface: 2# -TXD (sending), 3#-RXD (receiving), 5#-
GND (ground), can be connected with PC directly.
Print Label
add: 1 : Sub-add
n/w: 0.0001 : Net-weight
u/w: 0.0000 : Unit weight
Pcs: 1 : Quantity
Note: The above setting related to RS232 is available only when the instru-
ment is with RS232 interface
To Next Page
Loading...
