7
BATTERY
• When appears on the display, you are requested to recharge the
scale for 12 hours. When the scale is recharging the mark will be
ashing and will disappear after recharging has nished
• Charging Light Indication: When the scale is charging the charge light
will turn Red. When the battery is done charging the charge light will
turn Green
ALARMS
Overloading alarm
• When the load on the platform is over 9d of the scale’s maximum
capacity, a beep will sound to alert you to remove the load from the
platform immediately
Unit Weight Alarm
• “Lack of Unit Weight” indicator will appear if the averaged unit weight or
set unit weight is not enough for accurate counting operation
Sample Number Alarm
• If the total weight of your sample is below limit value, it will indicate
lack of sample
Quantity Check Alarm
• When the quantity check function is on and you are over or under the
scale’s limitation the scale will emit beeps to warn you
• Short sounding beeps: if the quantity is over the upper limitation
• Long sounding beeps: If the quantity is less than the lower limitation
To Next Page
