Optima Scale OPF-P - Page 8

6
PLU Counting Function
To Use PLU keys: If you’re going to be using the same object repeatedly you
can save your sample as a PLU key.
• To use, you must be in weighing mode (make sure the symbol is not
on PLU, if you are, press [PLU] key to exit PLU mode)
• Add weight to the scale
• Press [PLU] key followed by the PLU# key you have your sample weight
saved under
• The scale should be counting based on your saved PLU sample
• Press [PLU] key to exit PLU mode
To Save an Objects Weight as a PLU# Key (P11-P21):
• In normal weighing mode (when you turn on scale), put the samples on
the pan and enter the quantity using the keypad
• Then press [SAMPLE] key
• Press [PLU]
• Press the PLU# key you want it stored on
• Press [M+]
• Press [PLU] to exit
• If you want to cancel current sample count setting, press CE key
To Clear Saved PLU#
• In PLU mode: (the symbol appears above PLU)
• Press [CE] key to enter the deleting mode
• Then press the PLU# key you want to clear
• To conrm and delete the PLU# value press [M+] to delete and exit the
PLU deleting mode
• If you don’t want to delete it, press [UNIT WEIGHT] key