Optima Scale OPF-P - User Settings

8
USER SETTINGS
User Setting Mode: In weighing mode, press both [CE] and [ZERO] to shift
enter the User Setting Mode
Selection of Anti-Shake
• In order to get faster responding speed or higher weighing stability, the
setting can be revised from a range of (1-7) the default set at 2
• The larger the value is, the higher the weighing stability will be and the
slower the responding speed will be and vice versa
• Enter the user settings and the display will show “FILT?”
• The ashing number of second line shows the present setting value
• Press [ZERO] or [TARE] to change the value
• Press [M+] to conrm the revised value or press [UNIT WEIGHT] to
cancel the revision and exit the function setting
Selection of Stable Range
• The stable range is 0-4 with default set at 3. The larger the value is the
faster the stable speed
• In User Setting Mode, select “Stab?”
• The ashing number on the second line shows the present setting value
• Press [ZERO] or [TARE] to change the value
• Press [M+] to conrm the revised value or press [UNIT WEIGHT] to
cancel the revision and exit the function setting
Selection of Zero Tracking Range
• You can change how lenient the scale is at nding the zero point
• The range is 0-6 with default set at 2. The bigger the number the more
lenient it is
• In User Setting Mode, select “Ztrc?”
• The ashing number on the second line shows the present setting value
• Press [ZERO] or [TARE] to change the value
• Press [M+] to conrm the revised value or press [UNIT WEIGHT] to
cancel the revision and exit the function setting