Version 1.0.3 - 2022-04-06 84 Translation of original instruction
D17 Pro│D23 Pro│D26 Pro│D33 Pro
EN
D17Pro_D23Pro_D26Pro_D33Pro_GB_3.fm
4. After assembly, make sure that the
adjusting screw points forward when
the drill chuck protection is closed.
Img. 3-7: Assembly 3
INFORMATION
There is a switch integrated in the fixture of drill chuck protection which monitors the closed
position. The machine cannot be started, if the drill chuck guard is not closed.
To Next Page
Loading...
