Optimum OPTIdrill DP 33 User Manual

Safety
Version 1.0.1 - 2020-08-1810 Translation of original instruction
DP33
EN
DP33_GB.fm
1.10 Safety check
Check the drilling machine before each start-up or at least once per shift. Inform the person
responsible immediately of any damage, defects or changes in the operating function.
Check all safety devices
 at the beginning of each shift (with the machine stopped),
 once a week (with the machine in operation) and
 after all maintenance and repair work.
Check that prohibition, warning and information signs and the labels on the drilling machine
 are legible (clean them, if necessary)
 are complete (replace if necessary).
INFORMATION
Organise the checks according to the following table;
1.11 Emergency-stop switch
CAUTION!
The drilling spindle keeps turning for a short time even after actuating the emergency
stop switch depending on the preset speed.
1.11.1 Drilling table
Seats for T-slots are attached to the clamping table.
WARNING!
Risk of injury due to workpieces flying off at high speed. Securely fix the workpiece on
the drilling table.
General check
Equipment check OK
Guards Mounted, firmly bolted and not damaged
Signs,
Markers
Installed and legible
Date: Checked by (signature):
Functional check
Equipment check OK
Emergency-stop switch After the emergency stop button is pressed, the
drilling machine must switch off.
Position switch of protective cover
V-belt
The drilling machine must not be switched on, if the
protective cover of the V-belts is opened.
Drill chuck guard position switch The drilling machine may not switch on, if the drill
chuck guard is opened.
Date: Checked by (signature):

Optimum OPTIdrill DP 33 Specifications

General

Brand	Optimum
Model	OPTIdrill DP 33
Category	Drill
Language	English