Operation
Version 1.0.1 - 2020-08-18 23Translation of original instruction
DP33 EN
DP33_GB.fm
Release the tension of the V-belts with the clamping lever.
Insert the V-belts at the desired speed position and retighten the V-belts with the lever. If
necessary, also adjust the tension of the V-belt on the motor.
ATTENTION!
Watch for the proper tension of V-belts.
Too heavy or too low tension of the belt can cause damage. The belts are correctly
tensioned, when it can be by pressing with the fingers for about 1 cm.
To Next Page
Loading...
