Version 2.5.1 - 2020-07-2814 Translation of original instructions
MH20V | MH20VL | MH20VLD
GB
MH20V_GB_1.fm
1.9.1 Emergency stop button
CAUTION!
Only press the emergency stop button (1) in a genuine emergency. Do not use the
emergency stop button to stop the machine during normal operation.
CAUTION!
The spindle continues to rotate for a
while, depending on the moment of
inertia of the spindle and the tool in use.
The emergency stop button (1) brings the
machine to a standstill.
Turn the knob to the right to unlock and
release the emergency stop button.
Img.1-1: Emergency stop button
1.9.2 Separation guard
Adjust the guard (2) to the correct height
before you start working.
To do so, slacken the clamping screw, set
the required height and re-tighten the
clamping screw.
There is a switch integrated in the spindle
protection mounting which monitors the
closed position.
INFORMATION
The machine cannot be started, if the spin-
dle protection is not closed.
Img.1-2: Separation guard
To Next Page