Optimum Optimill MH 20V - Operation; Control and Indicating Elements

Version 2.5.1 - 2020-07-28 29Translation of original instructions
MH20V | MH20VL | MH20VLD GB
MH20V_GB_4.fm
4 Operation
4.1 Control and indicating elements
Pos. Designation Item Designation
1 Control panel 2 Gear switch
3 Spindle sleeve lever 4 Spindle guard
5 Emergency stop button 6 Milling head height adjustment hand crank
7 Spindle protection clamping screw 8 Cross table
9 Clamping lever, Clamping screws 10
Display
• Depth display or speed display
11
Switching over display
• Millimetres or inches for depth display
12
Switching over display
• Speed or depth display of the quill
13 Display depth to zero 14 Spindle rotation ON
15 Spindle rotation OFF 16 Rotational direction spindle
17 Machine illumination ON / OFF 18 Infinitely variable speed adjustment
20 Fine feed of spindle sleeve 21 Main switch
22 Activation of the manual fine feed
2
6
8
5
4
7
9
9
20
12
11
13
14 15 16
17
10
18
21
1
3
22
20