OPTIMUM
MASCHINEN - GERMANY
2012
Safety
Version 1.0.1 dated 30 / 08 / 2012
Page 5
Original operating instructions
MH28V
GB
1 Safety
Glossary of symbols
This part of the operating manual
explains the meaning and use of the warning references contained in the operating man-
ual,
explains how to use the drilling-milling machine properly,
highlights the dangers that might arise for you and others if these instructions are not
obeyed,
informs you on how to prevent dangers.
In addition to this operating manual please observe
applicable laws and regulations,
legal regulations for accident prevention,
the prohibition, warning and mandatory signs as well as the warning notes on the drill-
ing-milling machine.
Always keep this documentation close to the drilling-milling machine.
INFORMATION
If you are unable to solve a problem using this manual, please contact us for advice:
Optimum Maschinen Germany GmbH
Dr. Robert-Pfleger-Str. 26
D- 96103 Hallstadt
Telefon: +49 (0) 900 - 19 68 220 (0,49 €/min.)
E-Mail: info@optimum-maschinen.de
gives additional indications
calls on you to act
enumerations
To Next Page
Loading...
