Optimum OPTIMILL MH 28V - EC - Declaration of Conformity

OPTIMUM
MASCHINEN - GERMANY
 2012
Appendix
Version 1.0.1 dated 30 / 08 / 2012
Page 59
Original operating instructions
MH28V
GB
8.8 EC - Declaration of Conformity
The manufacturer /
retailer:
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
hereby declares that the following product,
Type of machine: BF20 Vario; BF20 L Vario
Designation of the
machine:
Drilling-Milling machine
Serial number: J __ __ __ __
Year of manufacture: 20__
all relevant provisions of the Machinery Directive (2006/42/EC) corresponds.
The machnine continues to comply with all provisions of the Directives Electrical equipment
(2006/95/EC) and electromagnetic compatibility (2004/108/EC).
The following harmonized standards were applied:
DIN EN 12100-1:2003/
A1:2009
Safety of machinery - Basic concepts, general principles for design -
Part 1: Basic terminology, methodology
DIN EN 12100-2:2003/
A1:2009
Safety of machinery - Basic concepts, general principles for design -
Part 2: Technical principles
DIN EN 60204-1 Safety of machinery - Electrical equipment of machines - General
requirements
DIN EN 55011 class A
2003-08
Industrial, scientific and medical equipment - Radio-frequency distur-
bance characteristics - Limits and methods of measurement
The following technical standards were applied:
EN 13128: 2001
Safety of machine tools: Milling and drilling machines
Responsible for documentation: Kilian Stürmer, Tel.: +49 (0) 951 96822-0
Address: Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
Hallstadt, 01.03.2012
Kilian Stürmer
(Manager)