Optimum OPTIsaw SQ-V13 - Rating Plate and Hazard Classification

Version 1.0.1 - 2020-9-30 3Translation of original instruction
SQ-V13 EN
SQ-V13_GB.fm
 defines the intended use of the metal band saw,
 points out the dangers that might arise for you or others if these instructions are not
observed and
 informs you about how to avoid dangers.
In addition to these operating instructions, please observe
 the applicable laws and regulations,
 the statutory provisions for accident prevention,
 the prohibition, warning and mandatory signs as well as the warning notes on the metal
band saw.
Always keep this documentation close to the metal band saw.
1.1 Rating plate
1.2 Safety instructions (warning notes)
1.2.1 Classification of hazards
We classify the safety warnings into different categories. The table below gives an overview of
the classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
Symbol Alarm expression Definition / consequence
DANGER!
Impending danger that will cause serious injury or death to people.
WARNING!
A danger that can cause serious injury or death.
CAUTION!
A danger or unsafe procedure that can cause personal injury or
damage to property.
ATTENTION!
Situation that could cause damage to the metal band saw and product
and other types of damage.
No risk of injury to persons.
INFORMATION
Practical tips and other important or useful information and notes.
No dangerous or harmful consequences for people or objects.