Version 1.0.1 - 2020-9-30 4 Translation of original instruction
SQ-V13
EN
SQ-V13_GB.fm
1.2.2 Other pictograms
1.3 Intended use
WARNING!
In the event of improper use, the metal belt saw
will endanger personnel,
the metal band saw and other material assets of the operator may be endangered,
the correct function of the metal belt saw may be affected.
The machine is designed and manufactured to be used in environments where there is no
potential danger of explosion.
The metal belt saw is designed and manufactured to saw cold metal, cast material and plastics
or other material that are not health hazardous and do not generate dust.
The metal band saw must not be used on wood.
The pieces to be cut must be of a shape that will allow them to be securely attached in the
workholder vice and ensure that the piece does not come loose when it is being sawed.
The metal belt saw must only be installed and operated in a dry and ventilated place.
If the metal belt saw is used in any way other than described above, modified without authoriza-
tion of Optimum Maschinen Germany GmbH, then the metal belt saw is being used improperly.
We will not be held liable for any damages resulting from any operation which is not in accord-
ance with the intended use.
We expressly point out that the guarantee will expire, if any constructive, technical or proce-
dural changes are not performed by the company Optimum Maschinen Germany GmbH.
It is also part of the intended use that you
observe the limits of the metal belt saw,
Activation forbidden! Warning: flammable
substances!
Warning: suspended loads!
Warning: risk of stumbling!
Warning: tilting danger! Warning: automatic start-
up!
Warning: biological hazard!
Warning: injuries to hands!
Read the operating
instruction before
commissioning!
Pull out the mains plug! Wear protective glasses! Wear protective gloves!
Wear safety shoes! Wear a protective suit! Use ear protection! Protect the environment!
To Next Page
Loading...
