Wall Mounting (continued)
5. Secure the dual mounting brackets and the wall mount with the two pre-installed partially threaded
safety screws. (C).
Note:
• Maximum wall mount kit load capacity:160kg (352lbs).
• The wall mount should be installed into a concrete wall to ensure a secure installation. If a concrete
wall is not available, it is recommended that a stand installation be used instead.
Please refer to page 18.
• Screws must be tightly secured; however, to avoid damage to the mounting brackets, wall mount, or
IFP, do not overtighten the screws.
• The installation should only be performed by qualified technicians. Improper installation may cause the
IFP to fall or malfunction.
• Please note that damage resulting from incorrect installation will void the warranty.