9
• Inserting and Ejecting a SD / SDHC card (Not
supplied)
1. Insert a memory card (SD/SDHC/MMC/MMC 2.0) with the label facing
up until it reaches the end of the slot.
2. When the card is inserted successfully, the icon ( ) will appear on
screen and the internal memory will become inaccessible.
3. To remove the card, push the card to release it and then pull it out
gently.
• Recording a video clip / Taking a still picture
1. Set the capture or record resolution.
2. Choose the focus mode according to distance to object:
Normal mode for 3cm to ∞ @1X ; 30cm to ∞@17X.
Macro mode ( ) or ( )( ) for 3cm to ∞. Use the Zoom button (
/ ) to zoom in or zoom from the screen.
3. Press the Recording button ( ) to start recording and press it
again to stop recording
4. Press the Snap button ( ) to take a still picture.
OutputSwitch ResolutionSetting Recordingresolution
VGA
XGA 1024x768
UXGA 1024x768
720p 1280x720
WXGA 1280x800
HDMI
720P 1280x720
1080i 1920x1080
4K 1920x1080
• Playback
1. Press PLAYBACK button ( )
2. The last recorded picture or video clip will play.
3. Use Up /Down button to choose les.
Whenusinganewmemorycard,youarerecommendedtoformatthecardwiththe
device.DonotturnoffthedevicewhileformattingtheSDcard.
Evenifyourcardhasbeenformattedonotherdevices,youmayhavetoreformatthe
cardwiththedevice.
Ifnoexternalstoragedevicesareconnected,allfileswillbesavedinthebuilt-in
memory.