Optoma DC554 - Connect to a Microscope

15
4. Mount the microscope adapter onto the Lens.
5. Switch the focus mode to Macro. Press MENU ( )--> select Focus
( ) -->select Macro or press Macro button ( )( ) on remote
controller.
6. Connect the lens with microscope adapter to the microscope.
ForeyepiecesofaboutØ33mmandØ34mm,onlyamicroscopeadaptorwithØ28or
Ø34mmlabelshouldbeinstalled.
ForaØ28mmeyepiece,inserttheØ28mmadapterintothemicroscopeadapter.
ForaØ31mmeyepiece,inserttheØ31mmadapterintothemicroscopeadapter.
Iftheimageisnotclear.Pleaseadjustthefocusofmicrocope.
PresstheAFbutton( )orusethemanualfocusbuttononremotecontrolto
fine-tunethefocus.
• Connect to a microscope
Connect to a microscope enables you to examine microscopic objects
on a big screen.
1. Adjust the microscope and focus objects.
2. Choose an appropriate microscope adapter.
3. Microscope adapter accessories are applicable to Ø28mm,Ø31mm,
Ø33mm, and Ø34mm eyepieces.
Ø33Ø34mm
Ø33Ø34mm
Ø33Ø34mm
Ø28mm Ø31mm