Optoma DC554 - Page 16

14
PresstheSizebutton( )ontheremotecontrol,andusethedirectionbuttonsto
adjustthehighlighted/maskedsize.
PresstheColorbutton( )ontheremotecontrol,andusethedirectionbuttonsto
adjustthecolorofhighlighted/maskedarea.
»
Advanced operation
• Highlight function
1. Use the Highlight display to draw attention to a particular section of
the output image.
2. Press the Highlight button ( ) on the remote control, and use the
• Mask function
1. You can mask a section of the
output image.
2. Press the Mask button ( ) on
the remote control, and use the
direction buttons to move the
masked area.
• PIP (Picture in Picture) function
1. Press the PIP button ( ) to display
an around quarter-size still image on a
live display.
2. Use the up / down button to move the
still image to the top left and bottom left.
3. Use the left or right button to change
the shift between still images.