Problem Possible Solution
The image is stretched
when displaying a 16:9
DVD
The projector automatically detects the input signal y
format. It will maintain the aspect ratio of the projected
image according to input signal format with an Original
setting.
If the image is still stretched, adjust the aspect ratio y
in the Display settings of the Advanced menu in the
OSD.
LED warning indicator
(LED) is solid amber
A projector LED has failed and the projector will auto- y
matically shut down. If the problem persists, contact
Optoma.
TEMP warning indicator
(LED) is blinking amber
The projector has overheated. The display automati- y
cally shuts down. Turn the display on again after the
projector cools down. If the problem persists, contact
Optoma.
If the projector fan fails, the projector will automatically y
shut down. Clear the projector mode by pressing and
holding the Power button for 10 seconds. Please wait
for about 5 minutes and try to power up again. If the
problem persists, contact Optoma.
The remote control is
not operating smoothly
or works only within a
limited range
The battery may be low. Check if the LED indication y
from the remote is too dim. If so, replace with a new
CR2025 battery.
To Next Page
Loading...
