Oracle Acme Packet 1100 Hardware Installation And Maintenance Guide

6
Specifications
This chapter provides information regarding the specifications of the Acme Packet 1100.
Safety and Regulatory Certifications
For information regarding safety and regulatory certifications applicable to the Acme Packet
1100, refer to the Acme Packet Platforms Safety and Compliance Guide in addition to this
chapter.
Acme Packet 1100 System Specifications
Table 6-1 Acme Packet 1100 System Specifications (cont.)
Specification Description
Height 1.75 in (4.45 cm) (1U)
Width 11.25 in (28.57 cm)
Depth 8.48 in (21.54 cm)
Weight 4.0 lbs (1.81 kg)
Ports Four 10/100 Mbps Ethernet copper ports (RJ-45 connector) dedicated to
WAN, LAN, management and reserved functions
One T1/E1 port for PSTN fallback
Onboard Transcoding &
QoS Measurement
Module
Hardware-assisted transcoding and QoS monitoring and reporting
Mounting Table top
Rack mount flanges for front/rear/center installation in 19/23 in racks
(optional)
Wall mount brackets (optional)
LEDs Front: Ethernet link and activity status LEDs for PWR, NET MGT, INT, EXT,
and OK
Rear: Ethernet link and activity status LEDs for NET MGT, INT, EXT, and
T1/E1 link status
Memory 4 GB for active configuration and logs
40 GB fast M-SATA drive for runtime image, backup configurations and local
CDR backup
System Reset Reset pinhole
6-1

Oracle Acme Packet 1100 Specifications

General

Brand	Oracle
Model	Acme Packet 1100
Category	Controller
Language	English