Oracle Acme Packet 1100 Hardware Installation And Maintenance Guide

Date Description
January 2015 • Updated the book name to Acme Packet 1100 Installation and
Maintenance Guide.
• Corrected graphic for Serial Management Port.
• Elaborated on how to install the external power supply.
• Inserted a paragraph referring the reader to the Safety and Compliance
Guide for details on the topic.
• Corrected the reference to the T1/E1 port in Chapters 2 and 7 to RJ48C.
• Inserted a section in Chapter 4 about cabling the T1/E1 port.
• Removed the section in Chapter 6, entitled Removing and Installing the
Chassis Cover.
July 2015 • Added information on using Telnet and Secure Shell (SSH) for
configuration.
December 2015 • Added information on the optional 4- port E1/T1 module.
February 2017 • Added statement about DSP modules not being a FRU; they have to be
installed at the factory by Oracle.
September 2017 • Updates the description in "Transcoding/Digital Transcoding
Processors".
February 2018 • Updates the "Cabling the T1/E1 Port" topic to reflect support for two-
way TDM traffic.
About This Guide
vii

Oracle Acme Packet 1100 Specifications

General

Brand	Oracle
Model	Acme Packet 1100
Category	Controller
Language	English