How to Apply Deferred Updates (BUI)
Feature Version introduced
“Support for Optional Child Dir Deferred
Update” on page 303
2011.1.0.0
“Support for Multiple Initiator Groups per LUN Deferred
Update” on page 303
2011.1.8.0
“Support for Large Block Sizes Deferred
Update” on page 303
2013.1.1.0
“Support for Sequential Resilvering Deferred
Update” on page 303
2013.1.2.0
“Support for NDMP-zfs Replica Backup Deferred
Update” on page 302
2013.1.4.0
How to Apply Deferred Updates (BUI)
Use the following procedure to apply deferred updates using the BUI.
1.
Go to Maintenance > System.
The Deferred Updates section lists the available deferred updates, a description, and what
effects the update will have on the system.
2.
Click the 'Apply' button to apply all available deferred updates.
Deferred updates will apply to both nodes in a cluster, and the cluster peer must be up and
available to apply any deferred updates.
How to Apply Deferred Updates (CLI)
Use the following procedure to apply deferred updates using the CLI.
To see if there are any available deferred updates, run the show command. If
deferred updates are available, you can use the apply command:
clownfish:maintenance system updates> show
Updates:
UPDATE DATE STATUS
ak-nas@2011.04.24.3.0,1-2.19.11.2 2012-6-24 17:14:19 current
ak-nas@2011.04.24.4.2,1-1.28 2012-11-5 03:11:34 waiting
ak-nas@2013.06.05.0.0,1-1.2 2013-6-19 12:58:18 unavailable
Maintaining the System 301
To Next Page
Loading...
Need help?
General