11
THE OFFICIAL ORANGE PI USER'S GUIDE
Peripheral Requirements
If you have only bought the Orange Pi Zero2 board then you will need the following
items.
USB power supply – A 5V 3amps(3A) power supply with a USB Type-C connector.
The official OrangePi power supply is recommended for this board.
microSD card with OrangePi OS – The microSD card acts as an primary permanent
storage for the OrnagePi Zero2 board. A minimum of 8GB class 10 card is required.
Although 16GB microSD card is recommended. You need to write the OrangePi OS
into this blank microSD card. follow Appendix A for instructions.
To Next Page
Loading...