55
THE OFFICIAL ORANGE PI USER'S GUIDE
How to use the debug serial port on the Windows
platform?
1) Many serial debugging tools that can be used under Windows, such as SecureCRT,
MobaXterm, etc. The following shows how to use MobaXterm. This software has a
free version and can be used without purchasing a serial number.
2) Download MobaXterm
Download MobaXterm from here.
3) After opening the software, the steps to set the serial connection are as follows
a. Open the session setting interface
b. Select the serial port type
c. Select the port number of the serial port (choose the corresponding port number
according to the actual situation), if you cannot see the port number, please use the
360 driver master to scan and install the driver for the USB to TTL serial chip
d. Select the baud rate of the serial port to be 115200
e. Finally click the "OK" button to complete the setting
To Next Page
Loading...