OPTIMOD-AM DIGITAL OPERATION
3-43
This User Preset will be downloaded to the 9300 to which 9300 PC Re-
mote is currently connected.
If the User Preset is encrypted, PC Remote will request its password.
To modify INPUT/OUTPUT and SYSTEM SETUP:
Choose SETUP from the TOOLS menu.
To set a control, click it (it will become highlighted) and then use the wheel on
the mouse to adjust it. You can also use the + and – keys on the numeric keypad
to adjust any control.
To modify AUTOMATION:
C) Choose AUTOMATION from the TOOLS menu.
An Automation Dialog box will open.
D) Click the N
EW EVENT to create a new event
Controls to set the event type and time are available on the right hand
side of the dialog box.
E) Check the E
NABLE AUTOMATION check box at the top of the dialog box to en-
able automation.
To group multiple 9300s:
Right-click ALL CONNECTIONS in the Connections List and select NEW GROUP.
You can add multiple 9300 to a single group to help organize a network
of 9300. However, only one 9300 from within a group can be connected
to 9300 PC Remote at any one time.
Navigation Using the Keyboard
In general, PC Remote uses standard Windows conventions for navigation.
Navigate around the screens using the TAB key. Use CTRL-TAB to move to the next
tabbed screen in PC Remote.
Use the + and – keys or the left and right arrow keys on the numeric keypad to ad-
just control settings.
To Quit the Program
Use standard Windows conventions: Press ALT-F4 on the keyboard, or click the X on
the upper right corner with the mouse.