Orbis AirSTAR - Technical Specifications

15
TECHNICAL SPECIFICATIONS:
AirSTAR CFPP Analyzer
AirSTAR CPPP Analyzer
Methods
EN 116, IP 309, ASTM D6371, JIS K
2288, EN 16329.
Cloud Point: ASTM D2500, D5771, EN 219, ISO 3015, JIS
K2269
Pour Point: ASTM D97, D5853, D6892, EN 15, ISO 3016,
JIS K2269m, Chinese GB/T3535
Sample
detection
3 laser beam detection barriers
Camera, high definition. Detection of entire bottom area
and throughout entire sample.
Calibration
Extensive calibration routines for sample + bath jacket temperature (and vacuum measurement for
CFPP).
Temperature probe offset table. Programmable frequency of calibration notifications
Bath temp
range:
+65°C down to -105°C (-175ºF to 95°F)
Vacuum
Microprocessor controlled; constant and
dynamic profiles customizable.
Not applicable
Lift
mechanism
Not applicable
Microprocessor controlled stepper motor
Test/Aspirati
on Settings
Test can be started at programmable temperatures. Option for customized time and
aspiration/measuring intervals.
Cooling
profiles
Stepped and linear cooling profiles customizable (from 1 to 60°C/h). Unlimited storage capacity.
Temperatur
e
Measureme
nt
°C or °F; PT 100 class A probe, automatic probe ID detection with built-in calibration data storage.
Calibration certificate standard supplied. Metal probe for CPPP Head. In-glass probe for CFPP Head
(metal probe optionally available)
Cleaning
Quick programmable cleaning cycles, in
addition to required cleaning of filter
according to method specifications.
Cleaning is executed in Cleaning-Docking
station.
Manual cleaning of jar and probe.
Voltage
100–240 VAC, 50/60 Hz
Power
150 W
Dimensions
16cm x 59cm x 35cm (W x D x H)
16cm x 59cm x 49cm (W x D x H)
Weight
25 kg
See AirSTAR product brochure for more information