SAFETY NOTES
BEFORE OPERATING THE INSTRUMENT READ THIS MANUAL
IT IS THE RESPONSIBILITY OF THE OPERATOR TO FOLLOW THE LOCAL SAFETY RULES
DURING INSTALLATION AND OPERATION OF THE INSTRUMENT
THIS INSTRUMENT SHOULD ONLY BE OPERATED AND INSTALLED BY TRAINED AND
QUALIFIED STAFF.
WEAR SAFETY GLASSES AND PROTECTIVE CLOTHING WHEN OPERATING THE
INSTRUMENT
EQUIPMENT IDENTIFICATION
A typical AirSTAR instrument consists of 3 modules:
• the ColdBlock Cooling unit
• the CFPP and/or CPPP Head
• the Cleaning-Docking Station
The model and serial number of each individual module can be found on an
identification sticker on the rear of the instrument. This sticker also states
voltage and frequency information. When requesting service, please provide
this information to your local agent.
To Next Page
Loading...