Lubrication :
• Grease the differents points G (figures 15) with light oil.
• Grease the point A (figures 16 et 17) with light oil.
• Grease the front wheel axle (A figure 18) with grease NLGI N°2.
Cleaning :
• Clean the machine from flamable materials, dust or grass, especially around the engine and the
exhaust system to prevent fire.
Blade brake :
WARNING
Check the blade brake every month, check
the time for the blade to stop when blade
clutch lever is released (B, figure 19). If
more than 7 seconds are necessary for the
blade to stop, ask immediately to your
dealer to check the blade brake system.
Oil draining :
Refer to the engine manual
To Next Page
Loading...
