Increase Quality Through Interaction with the Field
The meter is showing 18.2 mVDC which is
essentially 0 volts
1
2
Nothing Works
Outlet - 120VAC
Power Circuit - Continuity
Power Cord to Harness Connection - Visual
Harness - Continuity
Power Switch – Continuity
If all the above are good and there is no 12VDC then the problem
is in the:
Power Supply - 12vdc
If all the above are good then the problem is in the:
Control Board
1. AC Outlet - ≈ 120VAC
2. Power Circuit – Continuity Ω
Increase Quality Through Interaction with the Field
25
To Next Page
Loading...
