Saw Chain
23 Mechanical Timber Harvesting Handbook
19HX – Harvester Saw Chain, Chamfer Chisel
™
– .404"
The 19HX chain is optimized for modern high-flow, high-power
heads and saw motors for faster cutting speed. It features tall
chamfer chisel cutters that combine best-in-class durability with
improved chip clearance, to deliver faster and more consistent
cuts in all types of wood.
Features and Benefits
• A new, taller and more aggressive chamfer chisel cutter is
designed to deliver faster cutting speed compared to 18HX.
• Oregon's largest and thickest .404" components are designed
to provide improved strength and superior durability
compared to 18HX.
• Patented saw chain steel that provides greater durability,
especially in cold cutting conditions.
• Blued cutters provide superior corrosion resistance and
improved strength.
• Recommended for use with rim-type sprockets only.
No. Gauge Pitch Standard Sequence
19HX .080"
2.0 mm
.404"
Oregon
®
Harvester Saw Chain
Note: Operating Parameters for this chain requires a minimum of
20 horsepower.
To Next Page
