Need help?Do you have a question about the Oregon Harvester and is the answer not in the manual?
Details the risks and prevention of chain shot events in timber harvesting.
Guidelines for operator, ground personnel, and bystander safety during operations.
Information on essential guards, shields, windows, and chain catchers.
Safety considerations for the cutting system components like guide bars and chains.
Presents technical data for saw chain parameters, service life, and lubrication.
Guidance on lubrication, chain tensioning, and adjustment systems for optimal performance.
Procedures for installing, breaking in saw chains, and general best practices.
Recommendations for safe cutting operations and optimal saw chain speed.
Defines terms like pitch/gauge and details 18HX, 19HX, 11H, 11BC chain models.
Covers cleaning, inspection, repair, sharpening techniques, and tools for saw chains.
Detailed instructions for breaking out rivets and joining saw chains.
Diagnosing and resolving common issues like slow cutting, wear, and breakage.
Explains the 10-digit numbering system used for Oregon guide bars.
Overview of different guide bar types, pitch, and mount dimensions.
Procedures for basic maintenance and replacing nose sprockets.
Diagnosing and resolving common problems with guide bar rails, noses, and mounts.
Describes Rim and HarvesterLok® types, and .404" drive-shaft configurations.
Procedures for aligning sprockets and information on 3/4"-pitch types.
Guidance on when to replace drive sprockets and common issues.
Key definitions and formulas for calculating hydraulic pump performance.
Formulas for determining the output flow rate of hydraulic pumps.
A section for recording equipment details and operational notes.
To Next Page
General
