Oricom TPS10 - Setting Options; Pressure Unit Configuration; Temperature Unit Configuration; Interface Display Interval

11
Settings
Pressure Unit Setting:
To access the Pressure Unit setting (Bar or Psi), press the "
" button to
select Psi or Bar then press the "
" to save and enter the next setting.
Psi
Temperature Unit Setting:
To access the Temperature Unit setting (degrees Celsius / Fahrenheit),
press "
" button to select the °C or °F, then press " " to save and enter
the next setting;
Time Interval Setting For Each Interface:
To access the Time Interval setting, press "
" button to set the time
interval for each interface, then press "
" button once to enter the next
setting.
Time intervals (seconds): 5 / 10 / 20 / 30 / 60 / OFF
Default: 5 seconds
Note: This setting is the time each interface is displayed for (tow vehicle /
Trailer / Spares)