Do you have a question about the Oricom TPS10 and is the answer not in the manual?
Brand | Oricom |
---|---|
Model | TPS10 |
Category | Measuring Instruments |
Language | English |
Mounting the display unit and using the anti-slip mat.
Instructions on how to turn the display unit on and off.
Connecting the display unit to a power source via USB.
Visual guide for assigning sensors to specific tyre locations.
Step-by-step instructions for physically installing sensors onto tyre valves.
Procedure to verify correct sensor data reception after installation.
Setting the display to show pressure in PSI or Bar.
Selecting temperature display units (°C or °F).
Adjusting the time each tyre interface is shown on the display.
Enabling or disabling the display of trailer/spare tyre sensor data.
Steps to activate the sensor programming mode on the display unit.
Overview of the sensor programming process starting on this page.
Important safety precautions and product usage guidelines.
Advice on minimizing driver distraction while using the display.
Solutions for common problems like no data or intermittent signals.
Warnings and advice regarding potential RF interference.
Contact details and hours for Oricom support in Australia.
Contact details and hours for Oricom support in New Zealand.