16
Settings
Sensor Deletion:
To access the sensor deletion setting, press "
" button to select the
programmed tyre data to be deleted.
Psi
Then hold " " button until the display shows "--", the sensor data has
been deleted.
Psi
Press " " button to select next sensor or " " button to save.
To exit the menu: Press and hold the "
" for 4 seconds, you will hear 2
beeps conrming you have exited the menu.
Note: Please visit our website to view tutorial videos on how to
delete sensors, Visit www.oricom.com.au select your model and
scroll down to the FAQ's section.
To Next Page
Loading...