15
Settings
To Disable/Enable Trailer and Spare Tyres:
Press "
" button to select Trailer or Spare Tyre interface, then press and
hold "
" button for 3 seconds to disable or to enable.
Press "
" button to save and enter the next setting.
Trailer axles setting:
Spare tyre settings (individual):
Enabled status (default) when trailer connected.
Enabled status (default) all spare tyre sensors turned on.
Disabled status spare tyre sensor turned off.
Disabled status when trailer not connected.
Note: Please visit our website to view tutorial videos on how to
disable / enable sensors, Visit www.oricom.com.au select your
model and scroll down to the FAQ's section.
To Next Page
Loading...