15
will pause giving you time to reply back if you wish. Once you press
the PTT switch the dual watch feature switches off.
Memory Scan
Initially All 80 channels are stored in memory, indicated by MEM next
to the channel on the LCD display. During a memory scan all channels
in memory are scanned for a signal.
To Remove or Add a channel to the memory
1. Select the channel you wish to add or remove from memory.
2. Press the MEM key to add or remove from memory, MEM will be
displayed on the LCD if the channel is in memory.
To start a Memory Scan
1. Press the M SC button, the scan will start, M-SC will be displayed
on the LCD display.
To stop a Memory Scan
1. Press the M SC button, the scan will stop, M-SC will disappear
from the LCD display.
Priority Scan
In a priority scan the selected priority channel is checked for every 5
memory channels.
To Start a Priority Scan
1. Press the P SC button for 2 seconds, the priority scan will start,
P-SC will be displayed on the LCD.
To Stop a Priority Scan
1. Press the P SC button for 2 seconds, the Priority Scan will stop,
P-SC will disappear from the LCD display.
Operation
UHF088-UG.indd 15 2012-2-8 15:44:45
To Next Page
Loading...
