16
Menu Features
The Menu button allows you to make a number of configuration
changes.
LIGHT Select Hi or Lo LCD Backlight Brightness
COLOUR Select Orange or Green LCD Backlight Colour
ROGER Select roger beep ON or OFF
BEEPTONE Select key beep sounds ON or OFF
CALL Select call tone 1 to 5
BCL Select Busy channel lock ON or OFF
Note: Press the PTT switch at any time to return to standby
Light
You can reduce the brightness of the LCD backlight to be more
comfortable while driving at night.
1. Press and hold the MENU button for 2 seconds, the display will
show Light.
2. Rotate the CH control to select between Bright [br] and Dim [di].
Color
You can select from two colour options for the LCD backlight. The two
options are Orange and Green.
1. Press and hold the MENU button for 2 seconds, the display will
show Light.
2. Press the MENU button again, the display will show CoLor
3. Rotate the CH control to to select between Orange and Green
colours.
Operation
UHF088-UG.indd 16 2012-2-8 15:44:45
To Next Page
Loading...
