10
Antenna information
The antenna (not supplied) is of critical importance, to maximize your
output power and receiver sensativity.
A poorly installed, inferior quality antenna or one not designed for the
correct frequency band will give poor performance. You should only
purchase an antenna designed for the 477MHz frequency band.
Antenna installation
1. Connect the antenna to the rear antenna socket using a PL259 coaxial
connector (not supplied).
2. To obtain maximum performance from the radio, select a high quality
antenna and mount it in a good location.
Never press the PTT or CALL button before connecting the antenna
to the radio.
Optional accessory
If required you may install an external (8 ohm, minimum 5 Watt power)
speaker fitted with a 3.5mm plug (not supplied)
The jack is located on the rear of the radio.
Installation
To Next Page
Loading...
Need help?
General
