17
Operations
Priority Channel
To store a Priority Channel, press the PRI button. The channel you
selected as your Priority Channel will then be automatically monitored
during the Group Scan.
Note: You can only store one channel as your priority channel.
Busy channel Lock
If the channel is already in use, you can prevent the UHF CB radio from
transmitting. This is particularly important when using CTCSS/DCS.
Roger Beep
This function emitts a beep on completition of transmission to alert the
other party that transmission has finisheds.
Key Beep
The Beep tone emits a tone when you press any of the buttons on the
microphone (except PTT button).
Call tone
You can select from 5 call tones this is the tone that is emitted when the
INS/CALL button on the microphone is pushed for 2 seconds.
Current regulations require calling tones to be restricted to one
transmission per minute. If a second transmission is attempted within
one minute then an error tone will sound.
To Next Page
Loading...
