Speed Control Motor and Controller Package
US2
Series
Motor
Speed controller
HM-9352
Operation switch
Rotation
direction switch
Setting dial
Front panel
Display
Cable fixing part
Motor connector
CN2
Input signal terminal
TB1
Power supply
connector
CN1
To lock so that the setting does not change
And others.....
To display the rotation speed of the gearhead output shaft
To limit the setting range of the rotation speed
To start and stop the motor slowly
Various settings can be performed when removing the front panel.
When the front panel is removed
Many other useful features are also available
Front side
Rear side
Set using these keys
You can lock or release only when the display shows the rotation speed.
ESC
key
ESC
key
Press and
hold for
5 seconds
Press and
hold for
5 seconds
The display blinks
several times
The display blinks
several times
Locking
the data
Lock
Releasing
the lock
Release
ESC key FUNCTION key
QUICK START GUIDE
Thank you for purchasing an Oriental Motor product.
Use the product correctly after thoroughly reading the section "Safety precautions" of the operating manual.
For more information about how to use the product, refer to the separate OPERATING MANUAL .
Refer to "6 Convenient functions"
OPERATING MANUAL
© Copyright ORIENTAL MOTOR CO., LTD. 2015
ORIENTALMOTOR CO.,LTD.
In a locking
state
To Next Page
Need help?
General
