Orion 150s User Manual

3OrionWelders.com
Table of Contents
Chapter 1: Setup and Assembly .................. p.5
What is in the Box ............................ p.5
Power Supply Setup .......................... p.5
Microscope Arm Setup ....................... p.6
Microscope LCD Filter Shutter ................ p.8
Become Familiar with the Microscope ....... p.8
Darkening Lens Setup ........................ p.9
Electrode Setup ............................... p.9
Shielding Gas Setup .......................... p.11
Chapter 2: Welder Interface Overview ........... p.12
Basic Screen .................................. p.12
Arc Screen .................................... p.13
Tack Screen .................................. p.14
Save/Load Screen ............................ p.14
Settings Tab .................................. p.15
Media Screen ................................. p.17
Chapter 3: Make A Weld .......................... p.18
Grey Waveform ............................... p.18
Make an Arc Weld ............................. p.18
Make a Tack Weld ............................ p.18
Orion 150s Pulse Arc and Resistance Welder
Weld Modes 4 (nano, micro, ultra, tack)
Pre-Programmed Metal Settings 11
Customizable Save Settings 50 (25 Arc & 25 Tack)
Languages 20 + (Ask rep if we have your language)
Display 8” Capacitive 10 point Touch Screen
Energy (Ws) 1-150 Ws
Switching Power Supply 110/240VAC (Auto Detected)
Weld Spot Diameter 0.5 - 3.5mm
Footprint (L x W x H) 12” x 6” x 10” (30.5 x 15.2 x 25.4cm)
Weight 20 lbs (9 kg)
Stereo Microscope Magnification 5x

Orion 150s Specifications

General

Brand	Orion
Model	150s
Category	Welding System
Language	English