• Lowest Recommended Impedance is 0.5Ω Stereo.
• RCA inputs are connected to both left and right channels
• Left Phase switch set to 0°
• Right Phase switch set to 0°
• Gain controls can be set together or independently of each other
• Output can be configured for high-pass, low-pass, band-pass or full range operation.
• Output is configured either for stereo operation.
TUNING NOTE: The phase switches can be individually switched for improved sound quality. Try different phase switch positions
for best sonic results. The high-pass crossover can be used as a subsonic filter with INTELLi Q. Configure the
high-pass crossover for “LOW” frequency range operation and set according to instructions explained in the
High-pass Crossover Section in this manual.
page 25
To Next Page
Loading...
Need help?
General
