page 3
INTRODUCTION
Thank you for your purchase of ORION’s HCCA power amplifier. Each HCCA amplifier is designed to be the leader in its class offer-
ing the most power, advanced features and extreme ease of use. In high-end sound systems or high SPL systems, the HCCA ampli-
fiers will give you years of trouble-free performance.
• HCCA 225
R- 25 watt per channel 2 channel high current amplifier with built-in fully variable high-pass, low-pass or band-
pass crossover with INTELLLi Q. Equipped with remote gain capability, the HCCA 225R is capable of 3, 2, or 1 channel op-
eration with a maximum power capability of 400 watts into 1Ω mono.
• HCCA 250R- 50 watt per channel 2 channel high current amplifier with built-in fully variable high-pass, low-pass or band-
pass crossover with INTELLLi Q. Equipped with remote gain capability, the HCCA 250R is capable of 3, 2, or 1 channel op-
eration with a maximum power capability of 800 watts into 1Ω mono.
• HCCA 275R- 75 watt per channel 2 channel high current amplifier with built-in fully variable high-pass, low-pass or band-
pass crossover with INTELLLi Q. Equipped with remote gain capability, the HCCA 275R is capable of 3, 2, or 1 channel op-
eration with a maximum power capability of 1200 watts into 1Ω mono
The installation of all ORION components will determine the overall performance result. Improper installation will not only limit
the performance of your ORION system but also potentially compromise the reliability of this amplifier. To ensure proper sonic re-
sults and component reliability, please refer to your Authorized ORION dealer for installation assistance of advice. If you decide to
perform the installation yourself, read the entire installation section of this manual before beginning the installation.
To Next Page
Loading...
Need help?
General
