3.
Page 3-1
Orion Machine Manual
Revision 3.0 Flex Stretchwrapper
15 February 2016 System Operation
System Operation
Operating Procedures
How to Start and Shut Down Your Wrapping System
Note: Do not use extension cords. Plug your Flex Stretch-wrapper directly
into an outlet.
POWER SWITCH
Located on the panel door, the lockable power switch has two settings:
• ON - connects a power source to the machine.
• OFF - disconnects the power source.
START AND EMERGENCY STOP SWITCHES
• Press the START button to gain Control Power prior to starting.
•The START switch is used to start the cycle once the load is available.
• The cycle may be stopped at anytime by pressing the E-STOP button.
The FLEX series machines are engineered to give the operator different levels of opera-
tion, the front panel or USER settings, and MENU DRIVEN parameters. The menu driven
parameters offer even more flexibility and security.
To Next Page
Loading...
Need help?
General
