Orion Welders
Orion Pulse Arc Welding Workbook
Introduction
ank you for choosing Orion and congratulations on your purchase!
You are now the proud owner of an Orion system. Please read and follow all safety precautions and before proceeding with
setup.
Sunstone Engineering is the parent company of Orion Welders. At Sunstone & Orion we are committed to producing quality
products and ensuring complete owner satisfaction. If you require assistance after reading this manual please contact us
with the information provided below.
Orion Welders, a Subsidiary of
Sunstone Engineering R&D Corp.
1693 American Way Suite #5
Payson, UT 84651
Email: sales@orionwelders.com
Voice: 801-658-0015
Fax: 866-701-1209
Go to - http://orionwelders.com/resources/ for additional product specific resources.
OrionWelders.com
Table of Contents
Introduction ..................................................... 1
Warranty Information .......................................... 2
Welding safety Precautions .................................... 2
Chapter 1: Pulse Arc Welding ................................... 5
Chapter 2: Resistance Welding (Tack Mode) ................... 8
Chapter 3: Tungsten Electrodes ................................ 11
Chapter 4: Techniques, Tips, & Tricks ........................... 15
Chapter 5: Metals ............................................... 20
Chapter 6: FAQ / Troubleshooting / Glossary ................. 27
Chapter 7: Cleaning ............................................. 31
To Next Page
Need help?
General
