ORTEC DSPEC - Page 68

DSPEC
®
Digital Gamma-Ray Spectrometer
62
Sample Response:
DEL_COLL 0000000000001.5
1.5 is a legal setting.
Execution Errors:
%131128085<CR>
The first value is incorrect.
%131132080<CR>
A value is needed.
VERIFY_GAIN_COARSE
cg[,inc]
Allows exploration of the legal coarse gain settings. It returns the closest legal coarse gain
setting to cg. If inc is included, the number reported is inc steps from the closest legal value
of cg.
Example Command and Response:
VERI_GAIN_COAR 15.1
$C00020ccc
20 is the closest coarse gain to 15.1.
VERI_GAIN_COAR 15,1
$C00050ccc
50 is one step above the closest coarse
gain to 15.
VERI_GAIN_COAR 15,–1
$C00010ccc
10 is one step below the closest coarse
gain to 15.
VERIFY_GAIN_FINE
fg[,inc]
Allows the legal fine gain settings to be explored. It returns the closest legal setting to gain. If
inc is included, the number reported is inc steps from the closest legal value of fg.
Sample Response:
GAIN_FINE 0000000000000.5
0.5 is a legal setting.
VERIFY_SHAP_CUSP
cusp[,inc]
Allows the cusp settings to be explored. It responds with the closest legal setting to cusp. If
inc is included, the number reported is inc steps from the closest legal value to cusp. See
SET_SHAP_CUSP.
Sample Response:
SHAP_CUSP 0000000000000.5
0.5 is a legal setting.
Execution Errors:
%131128085<CR>
The first value is incorrect.
%131132080<CR>
A value is needed.
VERIFY_SHAP_FLAT
flat [,inc]
Allows exploration of the flattop width settings. It returns the closest legal setting to flat. If
inc is included, the number reported is inc steps from the closest legal value to flat. See
SET_SHAP_FLAT.