To Next PageTo Next Page
Need help?Do you have a question about the ORTEC digiBASE-E and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Channels | 1 |
| Interface | USB 2.0 |
| Input Channels | 1 |
| Operating Temperature | 0°C to 50°C |
| Maximum Count Rate | 100, 000 counts/s |
| Power | 5 V |
| Input Impedance | 1000 Ω |
Highlights the key benefits and features of the digiBASE-E, such as gain stabilization and flexible acquisition modes.
Outlines the necessary computer hardware and software specifications for operating the digiBASE-E.
Briefly describes the content and purpose of the user's manual.
Describes the quality control tests performed on ORTEC instruments before shipment.
Provides instructions on how to return an instrument for repair, including contact information and procedures.
Advises on how to handle shipments that arrive with external or concealed damage.
Details safety precautions and methods for cleaning the instrument exterior.
Introduces the digiBASE-E hardware, its connectors, and basic operation.
Explains the different data acquisition modes, including PHA and List Mode, and gating features.
Provides step-by-step instructions for installing the necessary software and setting up the hardware.
Describes how multiple users can simultaneously access and control a digiBASE-E unit.
Guides on how to relocate a digiBASE-E with a static IP address to a new network.
Details how to configure digiBASE-E settings using the MAESTRO software's MCB Properties dialog.
Covers the gain and pile-up rejection controls for the amplifier in the MAESTRO software.
Details shaping controls and the virtual oscilloscope mode for amplifier settings.
Explains the controls for the Analog-to-Digital Converter, including discriminator and gate settings.
Describes the gain and zero stabilizer functions and their adjustment controls.
Details how to set and monitor the high voltage output for the detector.
Displays hardware and firmware information, including serial number and access status.
Shows the status tab, including the event counter and other monitoring information.
Explains how to set real time and live time presets for data acquisition.
Provides guidance on resolving common issues such as connection failures and communication errors.
Addresses errors related to incompatible static IP addresses and how to resolve them.
Offers solutions for problems where the software cannot find or communicate with the digiBASE-E.
Lists the key performance characteristics and specifications of the digiBASE-E.
Describes the available input connectors and their functions.
Discusses compatibility and usage with specific types of detectors.
Explains how the digiBASE-E is controlled and monitored via computer software.
Provides details on the physical dimensions, power requirements, and operating environment.
Explains the feature bits used in commands to indicate supported functionalities.
Details the communication protocol and methods used for interacting with the digiBASE-E.
Explains the format and structure of data collected in List Mode acquisition.
