14
Idle Fuel Feed Rate The Idle Fuel Feed Rate is the rate the auger delivers fuel
while the grill is idling at or above the set temperature. In
Cook Mode, you can manually adjust the Idle Fuel Feed Rate
using the Smoke Control switch. See “Understanding Idle
Fuel Feed Rate and Smoke Settings” for more information.
Low Temperature If the grill temperature is less than 150 degrees, the
displayed temperature flashes, indicating a low temperature.
This is not an error condition and does not affect the
operation of the grill. The flashing display is designed to
alert the operator that there is some risk of the fire going
out.
High Temperature If the grill temperature is greater than 615 degrees, a
Limit Error (ErH) flashing “ErH” is displayed indicating a high limit error and
the grill shuts down. Refer to the “Error Modes and
Messages” section for details.
To Next Page
Loading...
Need help?
General