Need help?Do you have a question about the Ortech TR-100 and is the answer not in the manual?
General| Brand | Ortech |
|---|---|
| Model | TR-100 |
| Category | Controller |
| Language | English |
Explains how the grill maintains a constant temperature using a microprocessor and components.
Describes how manual fuel feed rate is used for maximum smoke at low temperatures.
Provides step-by-step instructions for safely disconnecting and removing the existing grill control unit.
Guides on disconnecting, removing, positioning, routing wires, attaching, and connecting the temperature detector.
Instructions for installing the control into the cutout and connecting it to grill components.
Steps for preparing the grill, plugging it in, and setting the control to start testing.
Procedures to verify the draft fan, igniter, and fuel auger functionality.
Instructions for turning the grill off and reassembling it after successful testing.
Details the functionality of Cook Mode and Smoke Mode, including microprocessor and manual control.
Details codes like "P0"-"P15", "C10", "ErH", and "ErP" and their meanings.
Instructions for connecting to AC power and handling the "ErP" inadvertent start error.
To Next Page