Orved IDEA 31 - User Manual

ORVED S.P.A Rev.00 – 05/2019 – cod. XXXXXXX – Manuale d’uso confezionatrici sottovuoto IDEA Pag. 0 a 76
_______________________________________________________________________________________
ORVED S.P.A Rev.01 – 09/2019 – cod. 1500735-00EN – User Manual for IDEA vacuum packing machines Pag. 1 a 76
IDEA 30 – 40
IDEA 31 – 41
IDEA 32 Hi-Line – 42 Hi-Line
USER AND MAINTENANCE
MANUAL

Summary

Safety Instructions and Warnings

Intended Use

Defines the appliance's intended purpose and restrictions.

Children Safety Guidelines

Safety guidelines for children around the appliance.

Technical Safety Precautions

Safety precautions related to electrical and mechanical aspects.

Proper Use Guidelines

Guidelines for correct and safe operation of the machine.

Terms of Use and Safety

Electrical Safety and Warnings

Electrical safety warnings for appliance connection and use.

Operation Warnings and Cautions

Command Panel: IDEA 30-40; 31-41

Maximum Admissible Values

Operating with IDEA 30-40; 31-41

Vacuum Packing Foodstuff in Containers

External Containers Procedure

Vacuum Packing in Channelled Bags Externally

Command Panel: IDEA 32 Hi-Line; 42 Hi-Line

Functions and Warnings

Defines operational limits for vacuum, gas, sealing, and softair.

User Cycles Overview

Editable Programs

Detailed steps for editing and saving custom vacuum programs.

Vacuum Packing Foodstuff in Bags

Step-by-step guide for vacuum packing food in bags.

Chef Cycles

Parameter Settings for Chef Cycles

Chef Programs in Containers

Chef Programs in Bags

Degas Cycles - Progressive Vacuum Cycles

Degas Cycle Parameter Settings

Vacuum Packing with Degas Cycle

Jar Cycles

Editable Jar Cycle

Containers Placed in Vacuum Chamber

External Containers

Alarm Management

IDEA 30-40; 31-41 Alarms

Explains alarms like OIL and GAS for specific models.

IDEA 32 Hi-Line; 42 Hi-Line Alarms

Explains alarms for Hi-Line models (Cool, H2OUT, GAS, OIL, Overheating).

Oil Pump Dehumidification Cycle (H2 OUT)

IDEA 30-40; 31-41 H2 OUT Cycle

IDEA 32 Hi-Line; 42 Hi-Line H2 OUT Cycle

Scheduled Routine Maintenance

Troubleshooting Common Issues

Machine Not Working

Troubleshooting steps for when the machine fails to power on or operate.

Insufficient Vacuum or Vacuum Loss

Solutions for weak vacuum or vacuum loss in the bag.

Sealing Issues

Troubleshooting for sealing problems like burns, bubbles, or irregular seals.

Vacuum and Gas Issues

Solutions for insufficient vacuum, no vacuum creation, or gas quantity problems.

Lid and Container Issues

Troubleshooting for lid not closing or vacuum not being created in containers.

Installation Safety Instructions

Installation Procedures

Final Installation Steps

Steps for proper machine placement, ventilation, and electrical connection.

Connecting the Gas Bottle

Maintenance Guidelines

General Maintenance Warnings

Important safety warnings before performing any maintenance tasks.

Sealing Bar Component Replacement

Replacement of Complete Sealing Bar

Accessing Machine Internals and Pump Maintenance

Replacement of Pump Oil

Step-by-step guide for changing the vacuum pump oil.

Technical Data

Orved IDEA 31 Specifications

General

Sealing Length	310 mm
Control Type	Digital
Sealing bar length	310 mm
Pump capacity	8 m3/h
Voltage	230 V