Orved VM18 - Preliminary Information

VACUUM CHAMBER
PACKAGING MACHINES
42
Operation and maintenance manual / Ed. 10 - 2005
REV. 00 - Cod.: 1500154
GB
GB
GB
3. PRELIMINARY INFORMATION
3.1 TECHNICAL DATA
NOTE:
(a) H2 = COVER OPEN
(b)H1 = VACUUM CHAMBER
(c) H2 = COVER
(d)MAX.DEP. AT VACUUM CHAMBER CENTRE
(e) STANDARD H=140mm / SPECIAL H=250mm /400mm
(f) STANDARD H=110mm / SPECIAL H=130mm / 200mm
(g)STANDARD H=130mm / SPECIAL H=190mm / 280mm
(h)STANDARD H=190mm / SPECIAL H=260mm / 490mm
(i) STANDARD H=130mm / SPECIAL H=180mm / 300mm
(j) STANDARD H=130mm / SPECIAL H=250mm / 320mm / 350mm
(k) P= FLAT – B = CONVEX
(l) 1 B STD = 1 STANDARD SEALING BAR
2 B STD = 2 STANDARD SEALING BARS
2 BL = 2 LONG SEALING BARS
2 BC = 2 SHORT SEALING BARS
BL = 2 “L” SHAPED BARS
BQ = SQUARE BAR
(m) VARIABLE DEPENDING ON THE NUMBER AND LENGTH OF SEALING BARS
(n) IN THREE-PHASE VERSIONS: 10.3×38 CYLINDRICAL CERAMIC SAFETY FUSE
(p) 10 PROGRAMS
PRELIMINARY INFORMATION